Download a PDF version of this article
Introduction: This technical update article provides guidance on risk managing single glazed windows on conversion schemes.
For a number of years there has been some difficulty in achieving a satisfactory level of performance when dealing with listed buildings or buildings that fall within a conservation area.
Part L1B of the Building Regulations and Section 3 of the Scottish Building Standards state that certain classes of buildings may have an exemption from the energy efficiency requirements, where compliance with the regulations would unacceptably alter the character or appearance of the buildings. Such buildings are stated as: listed buildings, buildings in conservation areas and scheduled ancient monuments, which may be exempt from the energy efficiency requirements that may apply to ‘building work’.
Traditionally in such buildings it is the Local Authority Conservation Officer who may have jurisdiction in these buildings and although there are requirements in Building Regulations to upgrade thermal elements, it is accepted that historic buildings and building lying in conservation areas may not need to meet these requirements if the Conservation Officer feels that the upgrading of the building would have a detrimental impact to its historic status.
Our ‘New Homes’, ‘Social Housing’ and ‘Private Rental Scheme’ policies make reference to the building complying with Building Regulations, therefore we need to ensure that the building is compliant.
Defect Insurance Period: These policies exclude existing element during the ‘Defect Insurance Period’, so for example, any unaltered window would not be covered. The caveat to this statement is unless ‘major damage’ occurs to an existing element. A typical example of ‘major damage’ would be water ingress through the existing window which would be covered by the policy.
Structural Insurance Period: The building is covered for ‘Major Damage’ which includes cover to the waterproof envelope, therefore it is essential that the fabric can be proven to be waterproof, this would include the windows. This is essentially the main purpose of the ‘Refurbishment Assessment’ by our ‘Refurbishment Surveyor’ to ensure that the existing structure is suitable for warranty.
Where existing single glazed windows are retained, the following information will be required in order that our ‘Refurbishment Surveyor’ can consider the single glazed windows as viable for retention:
Once the above information is received the ‘Refurbishment Surveyor’ will then be in a position to fully consider if the retention of the existing windows will offer ourselves a standard insurance risk.
It should be noted that in all our other current warranty policies i.e, Self-build, Completed Housing and Commercial, these have full exclusions for existing building elements. However, where a particular element is to be upgraded this may mean the existing element would now be in cover where previously it was not.
Every care was taken to ensure the information in this article was correct at the time of publication. Guidance provided does not replace the reader’s professional judgement and any construction project should comply with the relevant Building Regulations or applicable technical standards. For the most up to date Premier Guarantee technical guidance please refer to your Risk Management Surveyor and the latest version of the Premier Guarantee technical manual.